#Cyberlink power2go 8 what is it upgrade

If you have issues with the stick in 1 particular slot (a no post for example) the slot may be bad. If you still have no post, try a different stick of ram in each slot by itself. Move it to the next slot until you have tried that stick in all slots by itself. Try 1 stick of ram in 1 slot at a time (remove all other ram sticks). Make sure you have the computer unplugged from power while removing or moving any hardware. Specs as off site (polled from beta spec program) Does anyone have any ideas? I appreciate everything ahead of time. I am a cheap man lol, I don't like to replace parts unless I know 100% it's my issue. I pulled the battery and made sure I bled the system of all power hoping to clear what ever was locking it up but I still have same result. I disconnected everything except the RAM and video card and same result. There is no onboard video so I put in the old video card that came with the base computer and I still get no output at all. You power it on and you can't even get into BIOS. The end result is as follows:Ĭomputer no long does anything. Typically I say 'ok GPU issues, lets do the basics'. Then one day my wife was browsing the net and the computer locked up, but this time when she restarted it, we got a 6-beep post error.

I did the basics (update drivers, reseating, air cleaning, air flow) and it started to happen less frequently. Mouse lock up too so I knew it was hardware related. Nothing specific, I couldn't replicate the issue it just happened randomly. Then the comp started getting random lock ups. Went in and replaced the graphics card and PSU and for a few months things were fine. I also got off craigslist a sealed NVIDIA GeForce GTX 670 for $150

#Cyberlink power2go 8 what is it upgrade

It was realitivly new and I wanted something that I could upgrade and not blow a ton of money. So I got a HP-Envy from craigslist (specs below) only paid $200 for it.